Senua’s Saga: Hellblade II PC requirements are in: RX 6800 XT, RTX 3080 or Arc A770 GPUs recommended with DLSS 3, FSR3 and XeSS 1.3 support

Senua’s Saga: Hellblade 2 will support all major scaling technologies

The game will require at least 16 GB of system memory and 70 GB of fast storage to run. These are the minimum requirements for the game to run efficiently, while performance levels vary depending on preferred resolution and available graphics power. Those with Intel’s latest Arc A580 or slightly older GTX 1070, RX 5700 graphics cards should be able to run the game at lowest settings with a resolution of 1080p.

Here scaling technology will come in handy, like FSR3 or XeSS 1.3, which are not supported by the latest GPUs. However, the game is also said to support DLSS3, meaning it will support all three technologies at some point (it was not made clear whether this support would be available at launch).

THE recommended The PC specs list the RTX 3080, RX 6800XT, and Arc A770 GPUs in order to run the game at high settings at 1440p resolution. We assume that the game must be well optimized for the Arc A770; otherwise, it is interesting to see this GPU in such a performance level.

The full graphics power of the RTX 4080 and Radeon RX 7900 XTX will be enough to run the game at 4K resolution with high settings.

Senua’s Saga: PC requirements for Hellblade 2, Source: Ninja Theory

Minimum: Low graphics preset, 1080p

• CPU – Intel i5-8400 or AMD Ryzen 5 2600
• GPU – Nvidia GTX 1070, AMD RX 5700 or Intel Arc A580
• VRAM – 6 GB
• System RAM – 16 GB
• Storage -70 GB SSD

AVERAGE: Medium graphics preset, 1080p

• Processor – Intel i5-9600 or AMD Ryzen 5 3600X
• GPU – Nvidia GTX 2070, AMD RX 5700 XT or Intel Arc A580
• VRAM – 8 GB
• System RAM – 16 GB
• Storage – 70 GB SSD

Recommended: High graphics preset, 1440p

• CPU – Intel i7-10700K or AMD Ryzen 5 5600X
• GPU – Nvidia RTX 3080, AMD RX 6800 XT or Intel Arc A770
• VRAM – 8 GB
• System RAM – 16 GB
• Storage -70 GB SSD

Very high: High graphics preset, 4k

• CPU – Intel i5-12600K or AMD Ryzen 5 5700X
• GPU – Nvidia RTX 4080 or AMD RX 7900 XTX
• VRAM – 12 GB
• System RAM – 16 GB
• Storage -70 GB SSD

Ninja Theory has confirmed that the game supports an ultra-wide configuration.

Senua’s Hellblade Saga 2 will be limited to 30 FPS on the Xbox Series X/S, but it’s unclear if the PC spec target is the same. The developers claimed that the 30 FPS gameplay on the console was a conscious decision, giving the game a more “cinematic” experience.

The game is now set to launch on May 21 and is available for pre-order on Steam. There are benefits to pre-ordering this game, so it would make sense to wait for the release and read reviews before committing $49.

Source: Ninja theory